EN | 中文

Dew Point Sensor

上一页 9 / 19 下一页

Dew Point Sensor 節能產品和配件


CS-iTEC dewpoint sensor / dew point monitor S 215

The CS-iTEC dew point sensor S 215 provides reliable and long term stable dew point monitoring in industrial applications. With these new models dew point measurement in refrigerant dryers becomes affordable and can replace traditional temperature measurement which often couldn’t tell the real dew point. S 215 outputs the measurement value through the loop powered 4-20 mA signal.

Application

Dew point measurement is used in:
Compressed air dryers and before sensitive equipment

  • Plastic injection process resin drying
  • Blow molding process
  • Medical gases in hospitals
  • Compressed air purity in food and pharmaceutical industry
  • In all industrial processes requiring high purity of clean and dry air (CDA)

Product features

  • Affordable dew point sensor for mid range applications such as refrigerant dryer monitoring
  • Long term stability
  • IP65 casing provides robust protection in rough industrial environment
  • Very fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Can be installed directly into dryers through G 1/2″ thread
  • High accuracy of ± 2 ºC dew point

Technical data

Measuring range
Dew point
Relative humidity
Temperature
-20…50 °C
0…99.9 %
-30…70 °C
Accuracy ±2 °C dew point
Pressure range -0.1 … 5.0 MPa
Power supply 10 … 30 VDC
Ambient conditions -20 … 50 ºC
Response time t90 0…-20 ºC: 30 sec
-20…0 ºC: 10 sec
Output signal 4…20 mA, 2-wire
Connection M12, 5 pole
Casing Zinc alloy
Classification IP65
Process connection G 1/2” thread (ISO 228/1)
UNF 5/8″ thread (on request)
Transport temperature -30 … +70 ºC

请留下您的询问,我们会尽快回复您。
姓名*  
公司名字  
询问物品  
产品数量  
电子邮件*  
联络号码*  
附件  
*只支持 gif, jpeg, jpg, png, pdf
信息*  

转至手机版